|
|
|
National Stock Number:
5310-00-943-2428
Federal Supply Class:
5310
National Item Identification Number:
009432428
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 443662 | 03730 | GOULD E A AND CO | | 443662 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 443662 | 30201 | TREGO INC | | 443662 | 31633 | ALINABAL HOLDINGS CORPORATION | | 443662 | 59420 | DYNAMIC GUNVER TECHNOLOGIES LLC | | 443662 | 62224 | SATELLITE AEROSPACE, INCORPORATED | | 443662 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.770 INCHES MINIMUM AND 0.790 INCHES MAXIMUM | | OVERALL DIAMETER | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
|
|