|
|
|
National Stock Number:
5310-00-944-2604
Federal Supply Class:
5310
National Item Identification Number:
009442604
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| 123WM40023-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123WM40023-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP E4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | HARDNESS RATING | 37.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | HOLE DIAMETER | 0.631 INCHES MINIMUM AND | | 0.643 INCHES MAXIMUM | | SHOULDER DIAMETER | 1.125 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.625 INCHES NOMINAL | | SHOULDER HEIGHT | 0.125 INCHES NOMINAL | | MATERIAL THICKNESS | 0.250 INCHES NOMINAL | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | MINIMUM YIELD STRENGTH | 16500 POUNDS PER SQUARE INCH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 79RG9 | | DESIGN CONTROL REFERENCE | 123WM40023-1 |
|
|