5310-00-951-7209, WASHER,FLAT

National Stock Number:
5310-00-951-7209

Federal Supply Class:
5310

National Item Identification Number:
009517209

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

10364312	A486G	NIMIKKEISTOKESKUS NCB FINLAND
13207E6761FN98	97403	CECOM LR CENTER
3416534	45152	OSHKOSH CORP
3416534	75Q65	OSHKOSH DEFENSE LLC
5310PL0898697	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310009517209	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
804473	02280	AMERICAN HOIST AND DERRICK CO
AF32T2000A14-9	08427	ENVIRONMENTAL ELEMENTS CORP
9HB25	45152	OSHKOSH CORP
804473	49185	TEREX AMERICAN CRANE CORP
5310PL1370931	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL1792486	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL1806506	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
70-99-0004-23	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
YN103345	03240	LAL ACQUISITION INC
AF32T2000A14-9	75370	KAYDON RING & SEAL INC
FFW92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS15795-221	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27183-22	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.681 INCHES MINIMUM AND 0.718 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
PERIPHERAL SHAPE STYLE	ROUND
PROPRIETARY CHARACTERISTICS	PACS
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND A CLASS
OVERALL DIAMETER	1.743 INCHES MINIMUM AND 1.780 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THICKNESS	0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM

Click here to Register for Free 30-day Trial