|
|
|
National Stock Number:
5310-00-952-0309
Federal Supply Class:
5310
National Item Identification Number:
009520309
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121877 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 143600416 | D1876 | WARTSILA ELAC NAUTIK GMBH | | 310-0740-640 | 13499 | ROCKWELL COLLINS, INC. | | 418154-64 | 96214 | RAYTHEON COMPANY | | 5310009520309 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310009520309 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | NAS620C416 | 0PXV4 | THE BOEING COMPANY | | NAS620C416 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | 9336C2008-16 | 87557 | LOCKHEED CORP LOCKHEED ELECTRONICS CO INC | | 5310PL0738240 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5310PL1370133 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 9336C2008-16 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 816445-153 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | NAS620C416 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OVERALL DIAMETER | 0.463 INCHES MINIMUM AND 0.483 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.063 INCHES NOMINAL |
|
|