|
|
|
National Stock Number:
5310-00-956-3660
Federal Supply Class:
5310
National Item Identification Number:
009563660
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 706B347P2 | 07482 | GENERAL ELECTRIC COMPANY | | 706B347P2 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.055 INCHES NOMINAL | | COUNTERBORE DIAMETER | 0.254 INCHES MINIMUM AND 0.260 INCHES MAXIMUM BOSS | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | FLANGE DIAMETER | 1.240 INCHES MINIMUM AND 1.280 INCHES MAXIMUM | | FLANGE THICKNESS | 0.183 INCHES MINIMUM AND 0.191 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION G | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5645 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | NUT DIAMETER | 0.911 INCHES MINIMUM AND 0.912 INCHES MAXIMUM | | NUT COUNTERBORE DEPTH | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM BOSS | | NUT LENGTH | 0.587 INCHES MINIMUM AND 0.609 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | PRECIOUS MATERIAL AND LOCATION | THREADS SILVER | | SPECIAL FEATURES | THREE THRU HOLES,150 INCH DIA.,EQUALLY SPACED ON SAME BOLT CIRCLE;SLEEVE STEPPED SEGMENT 0.911 TO 0.912 INCHEO.D. AND 0.137 TO 0.139 INCHE DEEP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2410 ASSN STD SINGLE TREATMENT RESPONSE THREADS | | SURFACE TREATMENT | SILVER THREADS | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|