|
|
|
National Stock Number:
5310-00-959-2066
Federal Supply Class:
5310
National Item Identification Number:
009592066
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 10121889 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5310PL0738243 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | ALB509-12 | 75497 | LAMSON AND SESSIONS CO THE | | NAS1423-12 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | LS5990-12 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL | | BEARING SURFACE FINISH | 250.0 MICROINCHES | | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP E4340 OR STEEL COMP 4340 OVERALL | | NOMINAL THREAD SIZE | 0.750 INCHES | | NUT HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | WIDTH ACROSS FLATS | 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 16 |
|
|