| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.229 INCHES MINIMUM BASE |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.344 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| FURNISHED ITEMS | PREFORMED PACKING |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| OVERALL HEIGHT | 0.640 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-N-25027 MIL SPEC SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-N-25027 MIL SPEC SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-N-25027 MIL SPEC SINGLE MATERIAL RESPONSE WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855,CLASS 1,GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | ALUMINUM ALLOY OR STEEL WASHER |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL NUT |
| MATERIAL | STEEL SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT COUNTERBORE DEPTH | 0.125 INCHES MINIMUM BASE |
| NUT HEIGHT | 0.313 INCHES MAXIMUM |
| NUT LENGTH | 0.989 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 0.085 INCHES MAXIMUM |
| PLATE WIDTH | 0.568 INCHES MAXIMUM |
| SPECIAL FEATURES | 0.020 IN. MIN RADIAL FLOAT,0.030 IN. MAX AXIAL FLOAT; 50.0 PSIG MAX RATED PRESSURE,BLACK SEAL |
| SPECIAL TEST FEATURES | MAXMINUM LOCKING TORQUE 3 TIMES THE VALUE STATED IN MIL-N-25027 |
| SPECIFICATION/STANDARD DATA | 80205-NAS1473 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SUPPLEMENTARY FEATURES | NO QPL SHALL BE ESTABLSIHED |
| SURFACE TREATMENT | ANODIZE OR CADMIUM AND CHROMATE WASHER |
| SURFACE TREATMENT | CADMIUM AND CHROMATE NUT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE SHELL |
| TEMP RATING | 225.0 FAHRENHEIT MAXIMUM |
| TEST DATA DOCUMENT | 80205-NAS 1473 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 81349-MIL-N-25027 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 32 |