|
|
|
National Stock Number:
5310-00-967-1247
Federal Supply Class:
5310
National Item Identification Number:
009671247
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| FFW84 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| TEST DATA DOCUMENT | 81348-FFW84 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.509 INCHES MINIMUM AND 0.523 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | B CLASS AND 2 STYLE | | OUTSIDE DIAMETER | 0.873 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 302 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-763,CLASS 304 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL |
|
|