|
|
|
National Stock Number:
5310-00-982-0953
Federal Supply Class:
5310
National Item Identification Number:
009820953
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 209-076-105-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.0825 INCHES MINIMUM AND 0.1025 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 1.500 INCHES | | NUT DIAMETER | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | | SPECIAL FEATURES | 4 EQUALLY SPACED HOLES 0.046 IN. MIN 0.051 IN. MAX DIA DRILLED AT 45.0 DEGREE ANGLE FROM NOM CENTER OF OUTER PERIPHERY THROUGH ONE FACE OF NUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 18 |
|
|