| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.125 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| OVERALL HEIGHT | 1.005 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6370 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL COMP 1050 SHELL |
| MATERIAL | STEEL COMP 4130 NUT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| NUT HEIGHT | 0.597 INCHES MAXIMUM |
| NUT LENGTH | 1.426 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE WIDTH | 0.898 INCHES MAXIMUM |
| PLATE THICKNESS | 0.020 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 11-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SHELL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 20 |