5905-00-983-8484 RESISTOR,FIXED,WIRE WOUND,NONIND Index 5315-00-983-8487 PIN,STRAIGHT,HEADLESS

National Stock Number:
5310-00-983-8485

Federal Supply Class:
5310

National Item Identification Number:
009838485

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
1129E3190099NORTHROP GRUMMAN SYSTEMS CORPORATION
1129E31 PC1690099NORTHROP GRUMMAN SYSTEMS CORPORATION
386B010-02058529THE BABCOCK & WILCOX COMPANY DIV B&W SERVICE COMPANY DBA B & W SERVICE CO
386B010-02090099NORTHROP GRUMMAN SYSTEMS CORPORATION
1129E31PC1690099NORTHROP GRUMMAN SYSTEMS CORPORATION
1129E31 PC16T0720FNSS SAVUNMA SISTEMLERI ANONIM SIRKETI
531000498633458529THE BABCOCK & WILCOX COMPANY DIV B&W SERVICE COMPANY DBA B & W SERVICE CO
91758E58529THE BABCOCK & WILCOX COMPANY DIV B&W SERVICE COMPANY DBA B & W SERVICE CO
91758E PIECE 8158529THE BABCOCK & WILCOX COMPANY DIV B&W SERVICE COMPANY DBA B & W SERVICE CO
531000498633481348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
531000498633490099NORTHROP GRUMMAN SYSTEMS CORPORATION
531000498633496906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
5310009838485SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5320009838485SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
91758E-8158529THE BABCOCK & WILCOX COMPANY DIV B&W SERVICE COMPANY DBA B & W SERVICE CO
91758EPIECE8158529THE BABCOCK & WILCOX COMPANY DIV B&W SERVICE COMPANY DBA B & W SERVICE CO
FF-W-9281348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
PC1690099NORTHROP GRUMMAN SYSTEMS CORPORATION
MS27183-3096906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY THE FINISH
HOLE DIAMETER1.368 INCHES MINIMUM AND 1.405 INCHES MAXIMUM
OVERALL DIAMETER2.993 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND A CLASS
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THICKNESS0.136 INCHES MINIMUM AND 0.192 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us