| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.344 INCHES NOMINAL |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MATERIAL | ALUMINUM ALLOY BASE |
| MATERIAL | ALUMINUM ALLOY NUT |
| MATERIAL | PLASTIC POLYAMIDE (NYLON) LOCKING INSERT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| NUT HEIGHT | 0.234 INCHES MAXIMUM |
| NUT LENGTH | 0.984 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 0.075 INCHES MAXIMUM |
| PLATE WIDTH | 0.406 INCHES MAXIMUM |
| SURFACE TREATMENT | ANODIZE BASE |
| SURFACE TREATMENT | ANODIZE NUT |
| TEMP RATING | 250.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNC |
| THREAD QUANTITY PER INCH | 32 |