|
|
|
National Stock Number:
5310-00-988-3037
Federal Supply Class:
5310
National Item Identification Number:
009883037
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 170-1-109 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 170-1-109 | 1LA52 | DE NIZ, CARLOS |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.047 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | FLANGE THICKNESS | 0.380 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 0.938 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION C | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4118 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2017 OVERALL | | NOMINAL THREAD SIZE | 0.438 INCHES | | NUT DIAMETER | 0.250 INCHES NOMINAL | | NUT LENGTH | 1.000 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.710 INCHES MINIMUM OVERALL | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 20 |
|
|