|
|
|
National Stock Number:
5310-01-043-3457
Federal Supply Class:
5310
National Item Identification Number:
010433457
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1002 | 82340 | L3HARRIS TECHNOLOGIES, INC. | | 1002 | 9Y580 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM | | OVERALL DIAMETER | 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.013 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
|
|