|
|
|
National Stock Number:
5310-01-044-2283
Federal Supply Class:
5310
National Item Identification Number:
010442283
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10140-18 ITEM 7 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 10182-2 ITEM7 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 177038-53 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 10184-4 PIECE 7 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 5310PL1246535 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 2621-906-19-014 | 96169 | ELECTRIC BOAT CORPORATION | | 91150-1 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.324 INCHES MAXIMUM | | OVERALL DIAMETER | 0.497 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 316 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.045 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
|
|