|
|
|
National Stock Number:
5310-01-048-2640
Federal Supply Class:
5310
National Item Identification Number:
010482640
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-49-48F7 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 0.916 INCHES MINIMUM AND 0.926 INCHES MAXIMUM | | HOLE DIAMETER | 0.766 INCHES MINIMUM AND 0.776 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 240000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS DIAMETER | 0.916 INCHES MINIMUM AND 0.926 INCHES MAXIMUM |
|
|