|
|
|
National Stock Number:
5310-01-048-6118
Federal Supply Class:
5310
National Item Identification Number:
010486118
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-16-16C4 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | HOLE DIAMETER | 0.250 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.125 INCHES NOMINAL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 240000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TOP RECESS ANGLE | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
|
|