|
|
|
National Stock Number:
5310-01-050-0477
Federal Supply Class:
5310
National Item Identification Number:
010500477
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 16S445-7 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.190 INCHES NOMINAL | | DRIVE POINT QUANTITY | 3 | | DRIVE POINT WIDTH | 0.322 INCHES NOMINAL | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 0.099 INCHES | | NUT DIAMETER | 3.750 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.440 INCHES NOMINAL | | SMALL END DIAMETER | 3.370 INCHES NOMINAL | | SPECIAL FEATURES | THREE HOLES DRILLED AT A 45 DEGREE ANGLE | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD SERIES | UN | | THREAD QUANTITY PER INCH | 12 |
|
|