|
|
|
National Stock Number:
5310-01-050-5012
Federal Supply Class:
5310
National Item Identification Number:
010505012
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| BAC10BP3AP | 81205 | THE BOEING COMPANY | | BACW10BP3AP | 10630 | ANILLO INDUSTRIES LLC | | BACW10BP3AP | 56878 | SPS TECHNOLOGIES, LLC | | BACW10BP3AP | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | BACW10BP3AP | 6F140 | COMPONENT PRODUCTS CORPORATION | | BACW10BP3AP | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.201 INCHES MAXIMUM | | OVERALL DIAMETER | 0.369 INCHES MINIMUM AND 0.389 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIFICATION/STANDARD DATA | 81205-BACW10BP MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD 1ST TREATMENT RESPONSE AND AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL | | THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
|
|