|
|
|
National Stock Number:
5310-01-051-5532
Federal Supply Class:
5310
National Item Identification Number:
010515532
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| BACW10BP6AC | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| HOLE DIAMETER | 0.376 INCHES MINIMUM AND 0.387 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.649 INCHES MINIMUM AND 0.669 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | RECESS ANGLE | 90.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM | | RECESS DIAMETER | 0.489 INCHES MINIMUM AND 0.509 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81205-BACW10BP MANUFACTURERS STANDARD | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL |
|
|