5310-01-051-8093, WASHER,FLAT

National Stock Number:
5310-01-051-8093

Federal Supply Class:
5310

National Item Identification Number:
010518093

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

BACW10BP18P	10630	ANILLO INDUSTRIES LLC
BACW10BP18P	56878	SPS TECHNOLOGIES, LLC
BACW10BP18P	58009	MOELLER MANUFACTURING & SUPPLY, LLC
BACW10BP18P	6F140	COMPONENT PRODUCTS CORPORATION
BACW10BP18P	81205	THE BOEING COMPANY

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HOLE DIAMETER	1.125 INCHES MINIMUM AND 1.136 INCHES MAXIMUM
OVERALL DIAMETER	1.875 INCHES MINIMUM AND 1.895 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18733 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-18728 MIL SPEC 3RD MATERIAL RESPONSE OR AISI ASSN STD 4TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4130 OR STEEL COMP 4135 OR STEEL COMP 8630 OR STEEL COMP 8735 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	81205-BACW10BP MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	NICKEL AND CADMIUM OVERALL
THICKNESS	0.092 INCHES MINIMUM AND 0.108 INCHES MAXIMUM

Click here to Register for Free 30-day Trial