|
|
|
National Stock Number:
5310-01-052-0743
Federal Supply Class:
5310
National Item Identification Number:
010520743
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 16D510-11 | 56153 | SCHULZ PRODUCTS INC DBA SCHULZ PRODUCTS | | 16S510-11 | 17772 | AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC | | 16S510-11 | 66841 | PRECI-MANUFACTURING, INCORPORATED | | 16S510-11 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM | | HOLE DIAMETER | 0.752 INCHES MINIMUM AND 0.754 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.800 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 32.0 MICROINCHES ALL SURFACES | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS DIAMETER | 0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM |
|
|