| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.435 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5528 ASSN STD SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE NUT |
| MATERIAL | STEEL CORROSION RESISTING SHELL |
| MATERIAL | STEEL COMP 8740 OR STEEL COMP 4140 NUT |
| MOUNTING HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| NUT HEIGHT | 0.590 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| NUT LENGTH | 1.115 INCHES NOMINAL |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| PLATE WIDTH | 0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM |
| REMOVABLE NUT MANUFACTURER CODE | 29372 |
| REMOVABLE NUT MANUFACTURER PART NUMBER | CA21024-1 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | PASSIVATE SHELL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3B |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 24 |