|
|
|
National Stock Number:
5310-01-053-5314
Federal Supply Class:
5310
National Item Identification Number:
010535314
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 2105430-1 | 64547 | HONEYWELL INTERNATIONAL, INC | | 2105430-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| HOLE DIAMETER | 0.114 INCHES MINIMUM AND 0.121 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY OVERALL | | RECESS ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | RECESS DIAMETER | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE FILM OVERALL |
|
|