|
|
|
National Stock Number:
5310-01-056-5116
Federal Supply Class:
5310
National Item Identification Number:
010565116
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35691-73 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 1.000 INCHES | | THREAD QUANTITY PER INCH | 8 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL | | NUT STYLE | HEXAGON | | NUT HEIGHT | 0.519 INCHES MINIMUM AND | | 0.575 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 1.450 INCHES MINIMUM AND | | 1.500 INCHES MAXIMUM | | BEARING SURFACE TYPE | CHAMFERED OR | | WASHER FACED | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND | | 5 STYLE AND | | B GRADE | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY MATERIAL | | CRITICALITY CODE JUSTIFICATION | MATT | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-N-836 | | MANUFACTURERS CODE | 96906 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS35691-73 |
|
|