|
|
|
National Stock Number:
5310-01-058-3989
Federal Supply Class:
5310
National Item Identification Number:
010583989
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 245180-001 | 65092 | SOLARTRON ELECTRONICS INC WESTON INSTRUMENTS DIV |
|
Techincal Specification:
| MATERIAL | RUBBER SYNTHETIC OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 275652-000,FSCM 65092 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.045 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.150 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.025 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | COLOR | BLACK OVERALL | | HARDNESS RATING | 40.0 DUROMETER NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 65092 | | DESIGN CONTROL REFERENCE | 245180-001 |
|
|