|
|
|
National Stock Number:
5310-01-059-5930
Federal Supply Class:
5310
National Item Identification Number:
010595930
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2006408-3 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2006408-3 | 6K4C8 | GOODRICH CORPORATION | | 5310PL0748533 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND E4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.515 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.250 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.190 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | SPECIAL FEATURES | THIS ITEM IS CRITICAL TO APPLICATION (F-16 LANDING GEAR COMPONENT) AND IS ESSENTIAL TO WEAPON SYSTEM PERFORMANCE AND OPERATION. PER 417 SCMS | | CRITICALITY CODE JUSTIFICATION | FEAT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 17576 | | DESIGN CONTROL REFERENCE | 2006408-3 |
|
|