|
|
|
National Stock Number:
5310-01-080-8959
Federal Supply Class:
5310
National Item Identification Number:
010808959
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 255753 PIECE 30 | 43689 | HUNTINGTON INGALLS INC | | 2640-402X3 PIECE 18 | 96169 | ELECTRIC BOAT CORPORATION | | 2641-405-11ITEM | 96169 | ELECTRIC BOAT CORPORATION | | 2641-809-40 ITEM 24 | 96169 | ELECTRIC BOAT CORPORATION | | 845-4558738 ITEM 86 | 53711 | NAVAL SEA SYSTEMS COMMAND | | SS845-2050947 PIECE 18 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.688 INCHES NOMINAL | | OVERALL DIAMETER | 1.750 INCHES MINIMUM AND 1.751 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 400 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.140 INCHES NOMINAL |
|
|