| MATERIAL | STEEL COMP 302 OR |
| STEEL COMP 304 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL |
| SURFACE TREATMENT | PLASTIC OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| NUT STYLE | PLATE NUT SPACER |
| NUT LENGTH | 0.905 INCHES MINIMUM AND |
| 0.949 INCHES MAXIMUM |
| THRU-HOLE DIAMETER | 0.463 INCHES MINIMUM AND |
| 0.473 INCHES MAXIMUM |
| PLATE THICKNESS | 0.032 INCHES MINIMUM AND |
| 0.038 INCHES MAXIMUM |
| PLATE WIDTH | 0.540 INCHES MINIMUM AND |
| 0.560 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 0.098 DEGREES MINIMUM AND |
| 102.0 DEGREES MAXIMUM |
| MOUNTING PROVISION LOCATION | NUT PROJECTION SIDE |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.104 INCHES MINIMUM AND |
| 0.114 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.342 INCHES MINIMUM AND |
| 0.344 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.685 INCHES MINIMUM AND |
| 0.689 INCHES MAXIMUM |
| SPECIAL FEATURES | REMOVABLE SHIM BONDED TO SPACER ON COUNTERSINK SIDE |
| SPECIFICATION/STANDARD DATA | 26512-GS540H MANUFACTURERS STANDARD |