|
|
|
National Stock Number:
5310-01-083-6496
Federal Supply Class:
5310
National Item Identification Number:
010836496
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 204-011-457-003 | 97499 | BELL TEXTRON INC | | 204-011-457-3 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| HOLE DIAMETER | 0.328 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8559 COND C-4 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-7947 COND 1 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 COND C-1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.065 INCHES MINIMUM AND 0.077 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1095 OR STEEL COMP 4340 OVERALL | | RECESS ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM | | RECESS DIAMETER | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED |
|
|