|
|
|
National Stock Number:
5310-01-093-7035
Federal Supply Class:
5310
National Item Identification Number:
010937035
Description:
NUT,PLAIN,CAP
Detail:
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT.
|
Manufacturer Information:
| FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS24679-206 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BEARING SURFACE TYPE | CHAMFERED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 230 OR COPPER ALLOY 377 OR COPPER ALLOY 360 OR COPPER ALLOY 353 OR COPPER ALLOY 262 OR COPPER ALLOY 270 OR COPPER ALLOY 272 OR COPPER ALLOY 274 OR COPPER ALLOY 280 OR COPPER ALLOY 330 OR COPPER ALLOY 331 OR COPPER ALLOY 332 OR COPPER ALLOY 335 OR COPPER ALLOY 340 OR COPPER ALLOY 344 OR COPPER ALLOY 345 OR COPPER ALLOY 347 OR COPPER ALLOY 350 OR COPPER ALLOY 356 OR COPPER ALLOY 370 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 465 OR COPPER ALLOY 466 OR COPPER ALLOY 467 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OR COPPER ALLOY 210 OR COPPER ALLOY 220 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 752 OR COPPER ALLOY 764 OR COPPER ALLOY 770 OR COPPER ALLOY 240 OR COPPER ALLOY 342 OR STEEL COMP 309 OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 15 STYLE | | NUT HEIGHT | 0.530 INCHES NOMINAL | | NUT STYLE | CAP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES | UNF | | WIDTH ACROSS FLATS | 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
|
|