|
|
|
National Stock Number:
5310-01-096-6072
Federal Supply Class:
5310
National Item Identification Number:
010966072
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 357B1116-7 | 21178 | TEXTRON INC | | 357B1116-7 | 65065 | WOODWARD FST, INC |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5510 ASSN STD 1ST MATERIAL RESPONSE OR | | AMS5646 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.453 INCHES MINIMUM AND | | 0.458 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.620 INCHES MINIMUM AND | | 0.630 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.0276 INCHES MINIMUM AND | | 0.0280 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 65065 | | DESIGN CONTROL REFERENCE | 357B1116-7 |
|
|