5310-01-097-8025, WASHER,FLAT

National Stock Number:
5310-01-097-8025

Federal Supply Class:
5310

National Item Identification Number:
010978025

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

211003744	53711	NAVAL SEA SYSTEMS COMMAND
50321918 PIECE 268	53711	NAVAL SEA SYSTEMS COMMAND
5032918 PIECE 268	53711	NAVAL SEA SYSTEMS COMMAND
585-6406777-98	53711	NAVAL SEA SYSTEMS COMMAND
6406777-98	53711	NAVAL SEA SYSTEMS COMMAND
5310PL0959352	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
721-7286699-13	53711	NAVAL SEA SYSTEMS COMMAND
MS15795-420	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
H861-1506-13	96169	ELECTRIC BOAT CORPORATION
MS15795-420	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-420 .65 6X1.312X.095 TH	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
NICU-MS15795-42 0	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.653 INCHES MINIMUM AND 0.686 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-281,CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 400 OVERALL
OVERALL DIAMETER	1.305 INCHES MINIMUM AND 1.342 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
THICKNESS	0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM

Click here to Register for Free 30-day Trial