|
|
|
National Stock Number:
5310-01-124-4468
Federal Supply Class:
5310
National Item Identification Number:
011244468
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 393088-04 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 65160-00049-102 | 1DN91 | STANDARD AERO PARTS, INC | | 65160-00049-102 | 55214 | BETA SHIM CO. | | 65160-00049-102 | 78286 | SIKORSKY AIRCRAFT CORPORATION | | RY-184913 PIECE 25.4 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 65160-00049-102 | 9N473 | DIAL SUPPLY & MFG INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | CADMIUM AND | | PHOSPHATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR | | QQ-P-416,TY 3,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.5313 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.000 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.090 INCHES NOMINAL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 33.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 90.0 MICROINCHES ALL SURFACES | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 78286 | | DESIGN CONTROL REFERENCE | 65160-00049-102 |
|
|