|
|
|
National Stock Number:
5310-01-124-5117
Federal Supply Class:
5310
National Item Identification Number:
011245117
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 9810145-0-5804 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 9810145-05 | 13636 | HUTCHINSON AEROSPACE & INDUSTRY, INC. | | 9810145-05 | 81860 | HUTCHINSON AEROSPACE & INDUSTRY, INC. | | 9810145-05804 | 81860 | HUTCHINSON AEROSPACE & INDUSTRY, INC. | | 9810145-05 | K0479 | BARRY CONTROLS LTD | | 9810145-05 | U2255 | STOP-CHOC LIMITED | | PL CM/10-94 IT39 | 10855 | CARRIER CORP | | SB2000SERIES PG66 | 81860 | HUTCHINSON AEROSPACE & INDUSTRY, INC. | | 981045-0-5804 | 81860 | HUTCHINSON AEROSPACE & INDUSTRY, INC. |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BARRY 804,FSCM 81860 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 1.063 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 5.210 INCHES MINIMUM AND | | 5.290 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.375 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81860 | | DESIGN CONTROL REFERENCE | 9810145-05 |
|
|