|
|
|
National Stock Number:
5310-01-124-6636
Federal Supply Class:
5310
National Item Identification Number:
011246636
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 95-110021 | 70898 | BEECHCRAFT CORPORATION | | 95-110021 | 7EK50 | TEXTRON AVIATION INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND E4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.765 INCHES MINIMUM AND | | 0.775 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.187 INCHES NOMINAL | | RECESS DIAMETER | 0.890 INCHES MINIMUM AND | | 0.910 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.125 INCHES NOMINAL | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES ALL SURFACES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 70898 | | DESIGN CONTROL REFERENCE | 95-110021 |
|
|