|
|
|
National Stock Number:
5310-01-125-1225
Federal Supply Class:
5310
National Item Identification Number:
011251225
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10109432 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5310PL0153169 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | NAS1149DN816J | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AN960JD8L | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | ASNA2397JD8L | F6198 | AIRBUS OPERATIONS | | SS5072-S5 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR | | QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.174 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.370 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.013 INCHES MINIMUM AND | | 0.019 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND | | 1 GRADE AND | | D CLASS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-92 |
|
|