| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.750 INCHES MINIMUM AND 0.754 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.376 INCHES NOMINAL |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3325 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | RUBBER SILICONE CLASS Q SEAL |
| MATERIAL | STEEL BASE |
| MATERIAL | STEEL NUT |
| MATERIAL | STEEL SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| NUT HEIGHT | 0.545 INCHES NOMINAL |
| NUT STYLE | PLATE |
| NUT LENGTH | 1.000 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| PLATE THICKNESS | 0.018 INCHES MAXIMUM |
| PLATE WIDTH | 0.635 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BASE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT | CADMIUM BASE |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SHELL |
| TEMP RATING | 350.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNJF |