|
|
|
National Stock Number:
5310-01-128-5148
Federal Supply Class:
5310
National Item Identification Number:
011285148
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 727120 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM | | OVERALL DIAMETER | 0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PN14.10,FSCM 99167 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
|
|