|
|
|
National Stock Number:
5310-01-128-5784
Federal Supply Class:
5310
National Item Identification Number:
011285784
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 12272196 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.165 INCHES MINIMUM AND 0.168 INCHES MAXIMUM | | LENGTH | 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OVERALL | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | SPECIAL FEATURES | CENTER LINE OF HOLE IS 0.188IN. ALONG LENGTH,0.310 IN. ALONG WIDTH | | WIDTH ACROSS FLATS | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.0602 INCHES NOMINAL |
|
|