|
|
|
National Stock Number:
5310-01-129-0606
Federal Supply Class:
5310
National Item Identification Number:
011290606
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 90-09769-00 | 15476 | COMPAQ FEDERAL LLC | | 90-09769-00 | 4KM04 | TLC GEL-TRON INTL. CORP. DBA GEL-TRON INTL | | 9009769 | 15476 | COMPAQ FEDERAL LLC | | 9009769-00 | 15476 | COMPAQ FEDERAL LLC | | NR231A | 18714 | HARRIS CORP FINDLAY OPNS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.164 INCHES NOMINAL | | LENGTH | 0.402 INCHES MINIMUM AND 0.408 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | WIDTH ACROSS FLATS | 0.222 INCHES MINIMUM AND 0.228 INCHES MAXIMUM | | SURFACE TREATMENT | NICKEL OR CADMIUM OVERALL | | THICKNESS | 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
|
|