|
|
|
National Stock Number:
5310-01-130-9056
Federal Supply Class:
5310
National Item Identification Number:
011309056
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 10109583 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3003165-1 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.050 INCHES NOMINAL | | BOSS DIAMETER | 1.700 INCHES NOMINAL | | BOSS THICKNESS | 0.330 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND BOTH ENDS | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-12 OVERALL | | NOMINAL THREAD SIZE | 1.438 INCHES | | NUT STYLE | SLEEVE | | NUT WIDTH ACROSS FLATS | 1.740 INCHES MINIMUM AND 1.753 INCHES MAXIMUM | | NUT LENGTH | 0.680 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE FLANGE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS-13001,FSCM 93835 MFR REF SINGLE TREATMENT RESPONSE BOTH ENDS | | SURFACE TREATMENT | PAINT FLANGE | | SURFACE TREATMENT | PASSIVATE BOTH ENDS | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD SERIES | UN | | THREAD QUANTITY PER INCH | 12 |
|
|