|
|
|
National Stock Number:
5310-01-132-1077
Federal Supply Class:
5310
National Item Identification Number:
011321077
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10109630 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5710-6-10 | 86928 | SEASTROM MANUFACTURING CO INC | | 72838-10 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | OVERALL DIAMETER | 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 201 OR STEEL COMP 202 OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 410 OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 446 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.010 INCHES NOMINAL |
|
|