|
|
|
National Stock Number:
5310-01-132-7057
Federal Supply Class:
5310
National Item Identification Number:
011327057
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 128098-002 | 10138 | ASTRONAUTICS CORPORATION OF AMERICA |
|
Techincal Specification:
| BOSS DIAMETER | 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM OVERALL | | BOSS THICKNESS | 0.050 INCHES NOMINAL OVERALL | | CRITICALITY CODE JUSTIFICATION | ADBN | | CROSS-SECTIONAL SHAPE | ROUND W/WRENCH FLATS FLANGE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,C0ND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.086 INCHES | | NUT DIAMETER | 0.180 INCHES NOMINAL | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.170 INCHES NOMINAL | | SPECIAL FEATURES | NUT EDGE CHAMFERED 0.010 X 45 DEGREE;FLANGE,2 PARALLEL FLATTENED SURFACES 0.156 INCH WIDTH ACROSSFLATS;SURFACE ROUGHNESS 63.0 MICROINCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD QUANTITY PER INCH | 56 | | THREAD SERIES | UNC |
|
|