| DRILLED HOLE DIAMETER | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.688 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.344 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| HOLE CONFIGURATION STYLE | CONFIGURATION F |
| HOLE TYPE AND QUANTITY | 1 DRILLED |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7245 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-12545,T6 MIL SPEC SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | ALUMINUM ALLOY 6061 NUT |
| MATERIAL | STEEL CORROSION RESISTING LOCKING INSERT |
| MOUNTING HOLE DIAMETER | 0.093 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.985 INCHES MAXIMUM |
| PLATE THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| PLATE WIDTH | 0.406 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | CHROMATE NUT |
| TEMP RATING | 250.0 FAHRENHEIT MAXIMUM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2B |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 32 |