|
|
|
National Stock Number:
5310-01-134-5760
Federal Supply Class:
5310
National Item Identification Number:
011345760
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| MS27514-15B | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.059 INCHES MINIMUM | | BEARING SURFACE TYPE | CHAMFERED | | COUNTERSINK ANGLE | 150.0 DEGREES NOMINAL BOTH ENDS | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/8,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/5,T4 FED SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 2017 OVERALL | | NOMINAL THREAD SIZE | 1.125 INCHES | | NUT HEIGHT | 0.125 INCHES MINIMUM AND 0.142 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | SPECIAL FEATURES | MIN ONE KEYWAY THROUGH THREADS 0.135 IN MAX WIDE AND 0.045 IN MIN DEEP | | WIDTH ACROSS FLATS | 1.296 INCHES MINIMUM AND 1.329 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 18 |
|
|