|
|
|
National Stock Number:
5310-01-137-7066
Federal Supply Class:
5310
National Item Identification Number:
011377066
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| BACW10P22C | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| THICKNESS | 0.031 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OVERALL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059 TY 302 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | OVERALL DIAMETER | 0.750 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SPECIFICATION/STANDARD DATA | 81205-BACW10P MANUFACTURERS STANDARD | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.500 INCHES NOMINAL |
|
|