|
|
|
National Stock Number:
5310-01-138-5506
Federal Supply Class:
5310
National Item Identification Number:
011385506
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| MIL-DTL-26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27514-11B | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3186A108W | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.059 INCHES MINIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/5,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-200/8,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/8,T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 6061 OVERALL | | NOMINAL THREAD SIZE | 0.8125 INCHES | | NUT HEIGHT | 0.125 INCHES MINIMUM AND 0.142 INCHES MAXIMUM | | SPECIAL FEATURES | MIN OF 1 SLOT 0.045 IN. MIN DEEP AND 0.135 IN MAX WIDE CUT THROUGH LG OF THD; ADDITIONAL SLOTS MAY BE LOCATED W/SEPARATION OF 120 DEGREES | | WIDTH ACROSS FLATS | 0.984 INCHES MINIMUM AND 1.017 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 20 |
|
|