|
|
|
National Stock Number:
5310-01-140-3752
Federal Supply Class:
5310
National Item Identification Number:
011403752
Description:
WASHER,CONVEX
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 64361-04110-102 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | SILVER OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TYPE 1,GRADE A FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.285 INCHES MINIMUM AND | | 0.290 INCHES MAXIMUM |
|
|