5310-01-141-5566, WASHER,LOCK

5935-01-141-5567 SOCKET,PLUG-IN ELECTRONIC COMPON

National Stock Number:
5310-01-141-5566

Federal Supply Class:
5310

National Item Identification Number:
011415566

Description:
WASHER,LOCK

Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces

Manufacturer Information:

0740789	S3002	GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH
10109785	A486G	NIMIKKEISTOKESKUS NCB FINLAND
431504	21450	ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
431504	24617	GENERAL MOTORS CORP
AA55609-153	58536	FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
431504	7X677	GENERAL MOTORS LLC
MS35333-153	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FF-W-100	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS35333-153	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

HARDNESS RATING	35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
HOLE DIAMETER	0.115 INCHES MINIMUM AND 0.123 INCHES MAXIMUM
OUTSIDE DIAMETER	0.255 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS	0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND A GRADE
STYLE DESIGNATOR	FLAT INTERNAL TEETH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL

Click here to Register for Free 30-day Trial